FAQs
More FAQs- Will applying urethane void my manufacturer’s warranty on the floor?
- We've already had deep cleaning and disinfection done in our facility, doesn't that cover it?
- Is urethane slippery when wet?
It may. However, most factory warranties do not cover scratching, wear and abrasion. If your floor has reached this stage, your best option is to protect it. Many factory finishes will eventually wear out. You can most closely achieve that factory type finish by applying a thin coat of urethane. Refer to the manufacturer’s warranty.
The purpose of disinfection is for infection control to help ensure the health and safety of your facility and its occupants. Surface contamination can and is likely to recur. Once a surface has been disinfected, that same surface can easily be re-contaminated when the next passerby touches that surface or sneezes or coughs near that surface. As such, infection control is about regular and consistent cleaning and disinfection. Unless an occupant has been diagnosed with a confirmed case of an illness, you will likely not need to regularly perform deep cleaning and disinfection. However, to keep your facility healthy and safe, what you should be maintaining is your standard cleaning protocols with the addition of regular and consistent disinfection of high touch points.
Any coated surface can be slippery when wet. Our urethane product is considered to have acceptable slip resistance according to the American National Standards Institute (ANSI)/National Floor Safety Institute (NFSI) B101.3-2012 test method for measuring wet dynamic coefficient of friction (DCOF) of common hard-surface floor materials. We offer optional additives to create high slip resistance (lower probability of slipping) for wet environments or areas of concern.